ECScope 100

12-Lead Resting Portable ECG / EKG Equipment

ECScope 100 is a 12 lead Portable ECG recording device. It acquires 12 (3 limb leads - L3 is derived from L1 & L2, 3 derived augmented leads and 6 chest leads) Lead ECG signal and records all leads simultaneously.

Equipment Features

Standard leads acquired: I, II, III, aVR, aVL, aVF, V1 to V6
12 Leads simultaneous (5 -12 mode)
Lead and gain selection: User can dynamically select lead/gain at the start of recording
Digital sampling rate: 1200 samples/sec
Sampling resolution: 12 bit, bipolar
Frequency response: 0.05 Hz to 150 Hz
Notch filter: 50Hz, 60Hz for power interference
Input dynamic range: ±5 mV
Common mode/technique rejection: >100dB
DC offset capability: ±300 mV DC
Input lead impedance: >20M ohm at DC

Patient safety

• Patient leakage current: <10 uA
• Classified as Class I - Type CF device as per IEC requirements

Physical specifications

• Weight <450 gms (including the battery)
• A Dimensions 175 x 95 x 112 (mm)

Environmental specifications

• Operating temperature 0°C to 45°C
• Storage Temperature –20°C to +65°C
• Humidity 10% to 95%
• Pressure 700 -1060 millibars
• Protected from patient defibrillation

Accessories specifications

Data storage capability

• USB key can be used for data storage/backup
• Data report in an image format can be exported to a PC by connecting the product to the PC directly

Printing capability

• Direct printing using a compatible HP printer connected to the equipment
• Printing using USB key with a standard printer connected to a PC

Battery specifications

• Battery type AA battery (Re chargeable)
• Battery voltage 1.2 V DC, AA Size (4 numbers)
• Battery capacity minimum 2500 mAh
• Typical battery operational >7 hours
• Auto shutdown time 5 minutes

Regulatory compliance

IEC 60601-1, IEC 60601-1-1, IEC 60601-1-2, IEC 60601-1-4 and IEC 601-2-25